Electronics Line Penta XL series Manuel d'installation télécharger pdf (Page 24)

-24-

4.4: Periodic Test Timer Reset

The control panel sends the periodic test event code (address 57) to the central station

once every 24 hours. The first transmission of this code is sent 12 hours after power is

applied to the control panel. If a different time is required, you can program the control

panel to send the first periodic test message 24 hours after the periodic test timer is

reset.

To reset the periodic test timer:

1. Press

4, 7 to enter programming mode.

2. Enter the Installer Code; the Armed LED lights up and the System LED flashes.

3. Enter

99; the periodic test timer is reset and the periodic test code is sent to the

central station.

4. Press

# to exit programming mode.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 32 33

Pas de commentaire

Electronics Line Penta XL series Manuel d'installation Page 24