Electronics Line 3208GLD Manuel d'utilisateur télécharger pdf (Page 15)

Zone Status Display

Zone status will only be displayed if detailed display is selected

Zone 1, Bedroom, is open ZONE 1 OPEN

BEDROOM

Zone 3, Front Door, has been bypassed ZONE 3 BYPASSED

FRONT DOOR

Zone 4 has been tampered with ZONE 4 TAMPER

Zone 4, bedroom, is in alarm ZONE 4 IN ALARM

BEDROOM

System Status Display

AC power has been disconnected: SYSTEM AC LOSS

Backup battery is low (under 10.8V) or has been

disconnected:

SYSTEM LOW BATT

Communication failure or the telephone has been

disconnected:

TELEPHONE COMM.

FAILURE

Time and Date display (scrolls every few seconds): THU, 28 JUL 94

12:37 PM

Refer to Appendix A for information on returning system status display to normal.

3.4: Menu Selections/Direct Commands

There are two ways to perform a command on the control panel:

• Direct commands (LCD and LED keypads)

• Menu selections (LCD keypad only)

Direct Command Codes

To perform a direct command:

1. Press “SELECT”.

2. Enter the operation code for the desired command (refer to the “Command Codes” table below).

3. If prompted to, enter an authorized user code; an acknowledgment tone is sounded to indicate that the

command has been performed.

Command Codes

Disarm System X (1 - 4)

Bell Cancel

21X

Perimeter Arm System X (1 - 4)

Stop Telephone Call

22X

Normal Arm System X (1 - 4)

Follow Me

23X

Late to Close HHMM

User Codes

31X

Bypass Zone X (1 - 32)

View Log

32X

Unbypass Zone X (1 - 32)

Clear Log

Chime On

Show Versions

Chime Off

Manual Programming

Unbypass All zones

Default Programming 1

Set Time HHMM, DDMMYY

Default Programming 2

421

Walk Test

741

Remote Programming: off hook

422

Bell Test

742

Remote Programming: Callback

423

Telephone Test

83X

Reset Relay X

425

System Test

84X

Set Relay X

426

Battery Test

Access Control

Fire Sensor Reset

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 50 51

Commentaires sur ces manuels

Pas de commentaire

Electronics Line 3208GLD Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Electronics Line 3208GLD